Reference v4.1.0 Instruction Manual

1216 Network OS Command Reference

53-1003115-01

show zoning enabled-configuration

Displays information about the enabled zoning configuration.

Synopsis show zoning enabled-configuration

Operands None

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the cfg-name and enabled-zone fields of the enabled zoning

configuration for a Brocade VCS Fabric.

Usage Guidelines This command is supported in VCS Fabric mode. Zoning configuration data are automatically

distributed among all RBridges in the VCS Fabric. Standalone mode is not supported.

This command can be entered on any RBridge in a Brocade VCS Fabric.

Examples

switch# show zoning enabled-configuration

zoning enabled-configuration cfg-name cfg1

zoning enabled-configuration enabled-zone zone1

member-entry 10:00:00:00:00:00:00:01

zoning enabled-configuration enabled-zone zone2

member-entry 10:00:00:00:00:00:00:02

switch# show zoning enabled-configuration | count

Count: 8 lines

See Also show running-config zoning defined-configuration,

show running-config zoning enabled-configuration