Reference v4.1.0 Instruction Manual

1218 Network OS Command Reference
53-1003115-01
shutdown
2
shutdown
Disables the selected interface.
Synopsis shutdown
no shutdown
Operands None
Defaults The interface is disabled.
Command Modes Interface subtype configuration mode
Description Use this command to disable an interface.
Usage Guidelines Enter no shutdown to enable the interface.
Examples To disable a specific 10-gigabit Ethernet interface:
switch(config)# interface tengigabitethernet 1/0/1
switch(conf-if-te-1/0/1)# shutdown
To enable a specific 1-gigabit Ethernet interface:
switch(config)# gigabitethernet interface 1/0/2
switch(conf-if-gi-1/0/2)# noshutdown
See Also interface, interface ve, show ip interface, show interface