Reference v4.1.0 Instruction Manual

Network OS Command Reference 1247

53-1003115-01

spanning-tree restricted-role

Restricts the role of the port from becoming a root port.

Synopsis spanning-tree restricted-role

no spanning-tree restricted-role

Operands None

Defaults The restricted role is disabled.

Command Modes Interface subtype configuration mode

Description Use this command to configure the port from becoming a root port.

Usage Guidelines If xSTP is enabled over VCS, this command must be executed on all the RBridges.

Enter no spanning-tree restricted-role to return to the default setting.

Examples To configure the port from becoming a root port:

switch(config)# interface tengigabitethernet 0/1

switch(conf-if-te-0/1)# spanning-tree restricted-role