Reference v4.1.0 Instruction Manual

Network OS Command Reference 1253

53-1003115-01

speed (port-channel)

Sets the speed on the port-channel interface.

Synopsis speed {1000 | 10000 | 40000}

no speed

Operands 1000 Forces the speed to 1 Gbps.

10000 Forces the speed to 10 Gbps.

40000 Forces the speed to 40 Gbps.

Defaults Speed is 10000.

Command Modes Port-channel interface subtype configuration mode

Description Use this command to set the speed negotiation value for a specific port-channel interface.

Usage Guidelines Enter no speed to return to the default setting.

Examples To set the speed to 40 Gbps on a specific port-channel interface:

switch(config)# interface port-channel 44

switch(config-Port-Channel-44)# speed 40000