Reference v4.1.0 Instruction Manual

1260 Network OS Command Reference
53-1003115-01
ssh server shutdown
2
ssh server shutdown
Disables SSH service on the switch.
Synopsis ssh server shutdown
no ssh server shutdown
Operands None
Defaults None
Command Modes Global configuration mode
RBridge ID configuration mode
Description Use this command to disable SSH service on the switch.
Usage Guidelines Enter no ssh server shutdown to enable SSH service. This command is not distributed across the
cluster. The RBridge ID of the node should be used to configure service on individual nodes.
Examples Standalone mode
To shut down SSH service:
switch(config)# ssh server shutdown
To enable SSH service:
switch(config)# no ssh server shutdown
VCS mode
To shut down SSH service:
switch(config)# rbridge-id-3
switch(config-rbridge-id-3)# ssh server shutdown
To enable SSH service:
switch(config-rbridge-id-3)# no ssh server shutdown
See Also show running-config ssh server, show ssh server status