Reference v4.1.0 Instruction Manual

Network OS Command Reference 1267

53-1003115-01

support autoupload enable

Specifies if support autoupload is enabled or disabled. When set to enabled, the data files are

automatically transferred to the configured remote location.

Synopsis support autoupload enable

no support autoupload enable

Operands None

Defaults Support autoupload is disabled by default.

Command Modes Global configuration mode

Description Whenever a core file, FFDC, trace data file occurs, the data files are automatically transferred to

the configured remote location if the autoupload feature is enabled.

Usage Guidelines Use the no form of this command to disable support autoupload.

Examples To enable autoupload mode:

switch(config)# support autoupload enable

To disable autoupload mode:

switch(config)# no support autoupload enable

See Also show running-config support autoupload-param