Reference v4.1.0 Instruction Manual

1268 Network OS Command Reference

53-1003115-01

support autoupload-param

Defines autoupload parameters.

Synopsis support autoupload-param hostip host-ip user user_acct password password protocol [ftp | scp |

sftp] directory path

Operands hostip host-ip Specifies the IP address of the remote host.

user user_acct Specifies the user name to access the remote host.

password password Specifies the password to access the remote host.

protocol FTP | SCP | SFTP

Specifies the protocol used to access the remote server.

directory path Specifies the path to the directory.

rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

all Specifies all identifiers for a node.

Defaults None

Command Modes Global configuration mode

Description Use this command to define autoupload parameters.

Usage Guidelines None

Examples To configure autoupload parameters:

switch(config)# support autoupload-paramhostip 10.31.2.27 protocol [ftp|scp |

sftp]username hegdes directory /uers/home40/hegdes/autoupload password

(<string>): *****