Reference v4.1.0 Instruction Manual

1278 Network OS Command Reference

53-1003115-01

switchport port-security oui

Configures an Organizationally Unique Identifier (OUI) MAC address for port security on an

interface port.

Synopsis switchport port-security oui address

no switchport port-security oui

Operands address The OUI MAC address from which to accept vendor traffic, in the format

xxxx.xxxx.xxxx.

Defaults None

Command Modes Interface subtype configuration mode

Description Use this command to configure an OUI MAC address from which the interface will accept traffic. All

other addresses are ignored.

Usage Guidelines Use the no switchport port-security oui command to disable this option.

The use of static secure MAC addresses is not included in OUI-based port security.

NOTE

OUI-based port security is not supported on Brocade VDX 6710 and VDX 6720 platforms.

When you configure the first OUI MAC address on a secure port, traffic floods until the entries are

programmed in the hardware.

Examples None