Manualshelf

Reference v4.1.0 Instruction Manual

ManualsBrandsBrocade ManualsComputer AccessoriesNetwork OS Command
1311131213131314131513161317131813191320
1282 Network OS Command Reference
53-1003115-01
switchport private-vlan association trunk
2
switchport private-vlan association trunk
Assigns a primary private VLAN to private VLAN trunk port.
Synopsis switchport private-vlan association trunk primary_vlan_ID secondary_vlan_ID
no switchport private-vlan association trunk primary_vlan_ID
no switchport private-vlan association trunk primary_vlan_ID secondary_vlan_ID
Operands primary_vlan_ID The primary VLAN identification.
secondary_vlan_ID The secondary VLAN identification.
Defaults The port does not have any PVLAN attributes by default.
Command Modes Interface subtype configuration mode
Description This command associates primary VLAN and secondary VLAN to a private VLAN trunk port. Refer to
the Usage Guidelines.
Usage Guidelines Multiple PVLAN pairs (Primary VLAN, multiple secondaries) can be specified using this command.
Therefore, two no versions of this command are used to remove association for one primary VLAN,
or remove any trunk association.
On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Examples To associate a primary VLAN to PVLAN trunk port, in this example 2 is primary VLAN and 302 is
secondary VLAN:
switch(conf-if-te-178/0/9)# switchport private-vlan association trunk 2 302
To remove a primary VLAN to PVLAN trunk port,
switch(conf-if-te-178/0/9)# no switchport private-vlan association trunk 2
See Also private-vlan, switchport mode private-vlan, switchport private-vlan mapping