Reference v4.1.0 Instruction Manual

1284 Network OS Command Reference

53-1003115-01

switchport private-vlan mapping

Maps primary VLAN and secondary VLAN to a promiscuous port.

Synopsis switchport private-vlan mapping primary_vlan_ID [add | remove] secondary_vlan

no switchport private-vlan mapping

Operands primary_vlan_ID The primary VLAN identification. Refer to the Usage Guidelines.

add Adds the secondary VLAN to the primary mapping.

remove Removes the secondary VLAN from the primary mapping.

secondary_vlan The secondary VLAN identification.

Defaults The port does not have any PVLAN attributes by default.

Command Modes Interface subtype configuration mode

Description This command maps primary VLAN and secondary VLAN to a promiscuous port. This command

also maps a promiscuous port to selected secondary VLANs. This means only selected VLAN can

send packets to this port.

Usage Guidelines On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point

of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs

are as follows:

• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087

through 4095 are reserved on these switches), and 4096 through 8191 for service or

transport VFs in a Virtual Fabrics context.

• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963

through 4095 are reserved on these switches), and 4096 through 8191 for service or

transport VFs in a Virtual Fabrics context.

Examples None

See Also private-vlan, switchport private-vlan association trunk, switchport private-vlan mapping