Reference v4.1.0 Instruction Manual

Network OS Command Reference 1293

53-1003115-01

switchport trunk tag native-vlan

Enables tagging on native VLAN traffic.

Synopsis switchport trunk tag native-vlan

no switchport trunk tag native

Operands None

Defaults None

Command Modes Interface subtype configuration mode

Description Use this command to enable tagging for native traffic on a specific interface.

Usage Guidelines Enter no switchport trunk tag native to untag native traffic for a specific interface.

Examples To enable tagging for native traffic on a specific 10-gigabit Ethernet interface:

switch(config)# interface tengigabitethernet 178/0/9

switch(conf-if-te-178/0/9)# switchport trunk tag native-vlan

See Also interface, show vlan, switchport mode, switchport trunk allowed vlan rspan-vlan,

switchport trunk native-vlan