Reference v4.1.0 Instruction Manual

Network OS Command Reference 1295
53-1003115-01
system-max
2
system-max
Sets the maximum number of Address Resolution Protocol (ARP) requests that the system will
allocate.
Synopsis system-max arp number_of_arps
no system-max arp
Operands arp Enables setting the maximum number of ARP requests.
number_of_arps An integer value from 0 through 16384.
Defaults None
Command Modes RBridge ID configuration mode
Description Use this command to set the maximum number of ARP requests that the system will allocate.
Usage Guidelines Use the no form of this command to disable this feature.
Examples None
See Also None