Reference v4.1.0 Instruction Manual

Network OS Command Reference 1297
53-1003115-01
system-monitor
2
threshold Specifies the monitoring of thresholds
down-threshold Specifies an integer value that, when exceeded, indicates when hardware
is down.
marginal-threshold Specifies an integer value that, when exceeded, indicates when
hardware is operating marginally.
Defaults For system monitoring defaults, see the “System Monitor” chapter in the Network OS
Administrator’s Guide Supporting Network OS v.4.0.0.
Command Modes RBridge ID configuration mode
Description Use this command to configure field-replaceable unit (FRU) monitoring and actions. Depending on
these configuration settings, a variety of actions are generated when there is a change in FRU
state.
Usage Guidelines Use this command in RBridge subconfiguration mode to manage the system health monitoring of
individual nodes in a cluster.
Examples
switch(config-rbridge-id-154)# system-monitor sfm threshold down-threshold 3
marginal-threshold 2
switch(config-rbridge-id-154)# system-monitor cid-card alert state faultyinserted
action email
See Also rbridge-id, show system monitor, system-monitor-mail