Reference v4.1.0 Instruction Manual

1308 Network OS Command Reference
53-1003115-01
telnet server shutdown
2
telnet server shutdown
Disables Telnet service on the switch.
Synopsis telnet server shutdown
no telnet server shutdown
Operands None
Defaults None
Command Modes Global configuration mode
RBridge ID configuration mode
Description Use this command to disable Telnet service on the switch.
Usage Guidelines Enter no telnet server shutdown to enable Telnet service. This command is not distributed across
a cluster. The RBridge ID of the node should be used to configure service on individual nodes.
Examples Standalone mode
To enable Telnet service on a switch:
switch(config)# no telnet server shutdown
To shut down Telnet service on a switch:
switch(config)# telnet server shutdown
VCS mode
To shut down Telnet service on a switch:
switch(config)# rbridge-id 3
switch(config-rbridge-id-3)# telnet server shutdown
To enable Telnet service on a switch:
switch(config)# rbridge-id 3
switch(config-rbridge-id-3)# no telnet server shutdown
See Also show running-config telnet server, show telnet server status