Reference v4.1.0 Instruction Manual

ManualsBrandsBrocade ManualsComputer AccessoriesNetwork OS Command

1341

Network OS Command Reference 1311

53-1003115-01

threshold-monitor interface

Configures monitoring of port statistics on all external gigabit Ethernet interfaces: 1 GbE, 10 GbE,

and 40 GbE.

Synopsis threshold-monitor interface {[apply policy_name | pause | policy policy_name] typeEthernet area

[CRCAlignErrors

[alert

lowthresh-action [all | email none | raslog]|

none | raslog]] |

threshold

IFG

[alert

wthresh-action [all | email none | raslog]|

none | raslog]] |

threshold

MissingTerminationCharacter

[alert

lowthresh-action [all | email none | raslog]|

none | raslog]] |

threshold

[bu

SymbolErrors]

[alert

lowthresh-action [all | email none | raslog]|

none | raslog]] |

threshold

[buffer | high-threshold | low-threshold | timebase [day | hour | minute | none]]]}

no threshold-monitor interface

Operands apply Applies a custom policy that has been created by the policy operand.

pause Pause monitoring.

policy Specifies a policy name for monitoring by means of custom settings, rather

than default settings. A policy name is required before additional

configurations can be made. This operation is not supported from a

secondary node.

<WORD> Specifies the name of a custom policy configuration that can be saved and

applied by means of the app

ly operand.

type Ethernet Enables gigabit Ethernet interface monitoring.