Reference v4.1.0 Instruction Manual

1316 Network OS Command Reference

53-1003115-01

threshold-monitor security

Configures monitoring of security parameters, such as telnet and login violations.

Synopsis threshold-monitor security {[apply policy_name | pause | policy policy_name] area

[login-violation

[alert

lowthresh-action [all | email none | raslog]|

none | raslog]] |

threshold

telnet-violation

[alert

wthresh-action [all | email none | raslog]|

none | raslog]] |

threshold

[buffer | high-threshold | low-threshold | timebase [day | hour | minute | none]]]]}

no threshold-monitor security

Operands apply Applies a custom policy that has been created by the policy operand.

policy_name Name of a custom policy configuration created by the policy operand.

pause Pauses monitoring.

policy Specifies a policy name for monitoring by means of custom settings, rather

than default settings. A policy name is required before additional

configurations can be made. This operation is not supported from a

secondary node.

policy_name Name of a custom policy configuration that can be saved and applied by

means of the apply operand.

area Enables policy configuration.

alert Specifies whether an alert is sent when a threshold value is either above or

below a threshold trigger.

above Enables setting a value for highthresh-action, which specifies the action to

be taken when a high threshold is exceeded.

below Enables setting a value for highthresh-action and lowthresh-action, which

specifies the action to be taken when a low threshold is exceeded.

all Specifies that email and RASLog messaging are used, and that Port

Fencing is applied in the case of highthresh-action only.

all Specifies that email and RASLog messaging are used.

email Specifies that an email message is sent.