Reference v4.1.0 Instruction Manual

1334 Network OS Command Reference

53-1003115-01

usb

Enables or disables an attached USB device.

Synopsis usb {on |off}

Operands on Turns the USB device on.

off Turns the USB device off.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to enable or disable an attached USB device. The device will be inaccessible

until it is enabled.

Usage Guidelines This command is executed on the local switch. A switch reload will automatically turn the USB

device off.

This command is supported only on the local switch.

This command is not supported on the standby management module.

Examples To enable a USB device attached to the local switch:

switch# usb on

USB storage enabled

To disable a USB device attached to the local switch:

switch# usb off

USB storage disabled