Reference v4.1.0 Instruction Manual
Network OS Command Reference 1335
53-1003115-01
usb dir
2
usb dir
Lists the contents of an attached USB device.
Synopsis usb dir
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to list the contents of an attached USB device.
Usage Guidelines This command is executed on the local switch. The USB device must be enabled before this
function is available.
This command is supported only on the local switch.
This command is not supported on the standby management module.
Examples To list the contents of the USB device attached to the local switch:
switch# usb dir
firmwarekey\ 0B 2010 Aug 15 15:13
support\ 106MB 2010 Aug 24 05:36
support1034\ 105MB 2010 Aug 23 06:11
config\ 0B 2010 Aug 15 15:13
firmware\ 380MB 2010 Aug 15 15:13
Available space on usbstorage 74%
See Also usb, usb remove