Reference v4.1.0 Instruction Manual

1336 Network OS Command Reference

53-1003115-01

usb remove

Removes a file from an attached USB device.

Synopsis usb remove directory directory file file

Operands directory directory Specifies one the name of the directory where the file you want to remove

is located. Valid USBstorage directories are /firmware, /firmwarekey,

/support, and /config.

file file Specifies the name of the file to be removed.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to remove a directory or a file from an attached USB device.

Usage Guidelines This command is executed on the local switch. The USB device must be enabled before this

function is available.

This command is supported only on the local switch.

This command is not supported on the standby management module.

Examples To remove a configuration file from a USB device attached to the local switch:

switch# usb remove directory config file startup-config.backup