Reference v4.1.0 Instruction Manual

1356 Network OS Command Reference

53-1003115-01

virtual-fabric

Designates the FCoE Virtual Fabric Identification (VFID).

Synopsis virtual-fabric 1

Operands None

Defaults None

Command Modes FCoE fabric-map configuration mode

Description Use this command to designate the VFID.

Usage Guidelines The VFID value is 1. No other values are allowed.

You must be in the feature configuration mode for FCoE fabric-map for this command to function.

NOTE

The FCoE virtual fabric is not to be confused with the Virtual Fabric feature that supports service or

transport VFs.

Examples

switch(config)# fcoe

switch(config-fcoe)# fabric-map default

switch(config-fcoe-fabric-map)# virtual-fabric 1