Reference v4.1.0 Instruction Manual

1358 Network OS Command Reference

53-1003115-01

vlag ignore-split

Controls the ignore-split recovery functionality.

Synopsis vlag ignore-split

no vlag ignore-split

Operands None

Defaults vlag ignore-split is enabled.

Command Modes Port-channel configuration mode

Description Use this command to enable or disable the ignore-split recovery functionality.

When ignore-spilt-recovery is active, neither of the RBridges modify their actor SID when splitting

or rejoining the vLAG. They both advertise VSID and keep both sides of the vLAG alive.

Usage Guidelines This command is supported only when the switch is operating in Brocade VCS Fabric mode.

Enter no vlag ignore-split to disable this functionality.

NOTE

It is recommended that this command be enabled.

Examples

switch(config)# interface port-channel 27

switch(config-port-channel-27)# vlag ignore-split