Reference v4.1.0 Instruction Manual

Network OS Command Reference 1367

53-1003115-01

vrrp-extended-group

Configures a virtual-router-extended group.

Synopsis vrrp-extended-group group-ID

no vrrp-extended-group group-ID

Operands group-ID A user-assigned number from 1 through 128 that you assign to the virtual

router group.

Defaults None

Command Modes Virtual Ethernet (ve) interface configuration mode

Description Use this command to identify a virtual-router-extended group and enter into the virtual router

configuration mode.

Usage Guidelines This configuration is for virtual Ethernet (ve) interfaces only.

Enter no vrrp-extended-group group-ID to remove the specific VRRP Extended group.

If you remove a group, you cannot retrieve it. You would have to redo the configuration procedure.

Examples The following example shows how to assign the ve interface with a vlan number of 20 to the virtual

router extended group with the ID of 1. (First you must enable VRRP-E on the switch.)

switch(config)# rbridge-id 101

switch(config-rbridge-id-101)# protocol vrrp-extended

switch(config-rbridge-id-101)# int ve 20

switch(config-ve-20)# vrrp-extended-group 1

See Also interface, interface ve, virtual-ip