Reference v4.1.0 Instruction Manual

Network OS Command Reference 1377
53-1003115-01
zoning enabled-configuration cfg-action cfg-transaction-abort
2
zoning enabled-configuration cfg-action
cfg-transaction-abort
Aborts a current fabric-wide transaction.
Synopsis zoning enabled-configuration cfg-action cfg-transaction-abort
Operands None
Defaults None
Command Modes Global configuration mode
Description Use this command to abort the current zoning transaction without committing it. All changes made
since the transaction was started are removed and the zone configuration database is restored to
the state before the transaction was started.
Usage Guidelines This command is supported only in Brocade VCS Fabric mode. Zoning configuration data are
automatically distributed among all RBridges in the VCS Fabric. Standalone mode is not
supported.
This command can be entered on any RBridge in a Brocade VCS Fabric, but it is always executed
on the principal RBridge in fabric cluster mode. In logical chassis cluster mode, edits can be
performed only from the principal RBridge.
Examples To abort the current zone transaction:
switch(config)# zoning enabled-configuration cfg-action cfg-transaction-abort
See Also zoning enabled-configuration cfg-action cfg-save, zoning enabled-configuration cfg-name