Reference v4.1.0 Instruction Manual

Network OS Command Reference 125
53-1003115-01
clear ip pim rp-map
2
clear ip pim rp-map
Clears the static multicast forwarding table.
Synopsis clear ip pim rp-map
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear the static multicast forwarding table.
Usage Guidelines This command should be used after the static Rendezvous Point configuration has been changed.
This allows Protocol Independent Multicast to immediately start using the new Rendezvous Point,
rather than waiting for the old information to expire.
Examples None
See Also clear ip pim mcache, clear ip pim traffic