Reference v4.1.0 Instruction Manual

130 Network OS Command Reference

53-1003115-01

clear lldp neighbors

Clears the Link Layer Discovery Protocol (LLDP) neighbor information on all or specified interfaces.

Synopsis clear lldp neighbors interface [fortygigabitethernet rbridge-id/slot/port |

tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port]

Operands interface Use this parameter followed by the slot or port number to identify the

interface.

fortygigabitethernet rbridge-id/slot/port

Specifies a valid 40-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to clear the LLDP neighbor information about the devices learned through an

interface.

Usage Guidelines If the interface parameter is not specified, this command clears the LLDP neighbor information

received on all the interfaces.

Examples To clear the LLDP neighbor information for all interfaces:

switch# clear lldp neighbors