Reference v4.1.0 Instruction Manual

132 Network OS Command Reference

53-1003115-01

clear logging auditlog

Clears the audit log system messages.

Synopsis clear logging auditlog [rbridge-id {rbridge-id | all}]

Operands rbridge-id Executes the command on the specified switches. Valid completions for

rbridge-id include:

rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode.

all Specifies all switches in the fabric.

Defaults This command is executed on the local switch.

Command Modes Privileged EXEC mode

Description Use this command to clear the saved audit log messages.

Usage Guidelines This command is supported only on the local switch.

Examples To clear the audit log messages on the local switch:

switch# clear logging auditlog

See Also clear logging raslog, log-dampening-debug (BGP), show logging auditlog