Reference v4.1.0 Instruction Manual

136 Network OS Command Reference

53-1003115-01

clear nas statistics

Clears automatic network attached storage (NAS) statistics.

Synopsis clear nas statistics all | server-ip ip_addr mask [vlan vlan_id | vrf VRF_name] [rbridge-id

rbridge-id]

Operands all Shows all gathered statistics.

server-ip IP address for which to clear Auto-NAS statistics for.

ip_addr mask IPv4 address of a specified Auto-NAS port in dotted-decimal notation with a

CIDR notation mask.

vlan VLAN_id Specifies a VLAN interface for which to clear the statistics.

vrf VRF_name Specifies an OSPF VRF interfacefor which to clear the statistics.

[rbridge-id rbridge-id] Specifies an RBridge ID for which to clear the statistics.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to clear the specified Auto-NAS statistics.

Usage Guidelines This command is supported only on Brocade VDX 8770-4, VDX 8770-8, VDX 6740, and VDX 6740T

switches.

Examples None

See Also auto-qos enable, nas auto-qos, nasport server-ip, show nas statistics,

show running-config nas server-ip, show system internal nas, show cee maps