Reference v4.1.0 Instruction Manual

Network OS Command Reference 139

53-1003115-01

clear sflow statistics

Clears all sFlow statistics.

Synopsis clear sflow statistics interface [fortygigabitethernet rbridge-id/slot/port |

tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port]

Operands interface Use this parameter followed by the slot or port number to identify the

interface.

fortygigabitethernet rbridge-id/slot/port -

Specifies a valid 40-gigabit Ethernet interface.

rbridge-id Specifies the routing bridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id Specifies the routing bridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id Specifies the routing bridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults This command has no defaults.

Command Modes Privileged EXEC mode

Description Use this command to clear all accumulated sFlow statistics on all ports.

Usage Guidelines None

Examples To clear sFlow statistics:

switch# clear sflow statistics