Reference v4.1.0 Instruction Manual

Network OS Command Reference 141

53-1003115-01

clear spanning-tree detected-protocols

Clears all spanning-tree detected protocols on the interface.

Synopsis clear spanning-tree detected-protocols [interface | port-channel number |

fortygigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port |

gigabitethernet rbridge-id/slot/port]

Operands interface Specifies the interface on which to clear the spanning-tree counters.

port-channel number Specifies the interface is a port-channel. The number of available channels

range from 1 through 63 for standalone mode, and from 1 through 6144

for Brocade VCS Fabric mode. However, the channel can be assigned any

number from 1 through 6144.

fortygigabitethernet rbridge-id/slot/port

Specifies a valid 40-gigabit Ethernet interface.

slot Specifies a valid slot number.

port Specifies a valid port number.

tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to clear the detected protocols on the interface.

Usage Guidelines If the interface parameter is not specified, spanning-tree detected protocols are cleared for all

interfaces.

Examples To clear detected protocols for all interfaces:

switch# clear spanning-tree detected-protocols

To clear detected protocols for a 10-gigabit Ethernet interface:

switch# clear spanning-tree detected-protocols interface tengigabitethernet 0/1

To clear detected protocols for port-channel 23:

switch# clear spanning-tree detected-protocols interface port-channel 23