Reference v4.1.0 Instruction Manual

152 Network OS Command Reference

53-1003115-01

compare-routerid (BGP)

Enables comparison of router IDs, so that the path-comparison algorithm compares the device IDs

of neighbors that sent otherwise equal-length paths.

Synopsis compare-routerid

no compare-routerid

Operands None

Defaults None

Command Modes BGP configuration mode

Description Use this command to enable the comparison of the router IDs of otherwise equal paths.

Usage Guidelines Use the no form of this command to restore the default.

Examples To configure the device always to compare router IDs:

switch(config)# rbridge-id 10

switch(config-rbridge-id-10)# router bgp

switch(config-bgp-router)# compare-routerid