Reference v4.1.0 Instruction Manual

Network OS Command Reference 163

53-1003115-01

copy snapshot (logical chassis cluster mode)

Uploads and downloads configuration snapshot files to and from an FTP or SCP server.

Synopsis copy snapshot rbridge-id rbridge-id snapshot-id snapshot-id ftp://directory_path

copy snapshot rbridge-id rbridge-id snapshot-id snapshot-id scp://directory_path

copy snapshot ftp://directory_path rbridge-id rbridge-id snapshot-id snapshot-id

copy snapshot scp://directory_path rbridge-id rbridge-id snapshot-id snapshot-id

Operands rbridge-id rbridge-id Specifies the RBridge ID whose configuration snapshot has been captured.

snapshot-id snapshot-id Specifies the name of the snapshot that has been captured.

directory_path Specifies the FTP or SCP directory path to which you are uploading the

snapshot or from which you are downloading the snapshot.

Defaults None

Command Modes Privileged EXEC mode

Description If a snapshot was taken on a node that had been disconnected from the cluster, the cluster will not

have the snapshot. Therefore, you can use these commands to upload the snapshot from the

disconnected RBridge ID to an ftp or scp server, then download it to an RBridge ID on the cluster.

NOTE

The uploaded snapshot configuration file is stored as a tar file (of the form rbridgeId-snapshotID)

on the FTP or SCP server.

Usage Guidelines This command applies only to nodes that are members of a logical chassis cluster, not a fabric

cluster.

Examples To upload a snapshot configuration file called node4configuration to an FTP server:

switch# copy snapshot rbridge-id 11 snapshot-id node4configuration

ftp://backupdir_path

See Also vcs config snapshot (logical chassis cluster mode)