Reference v4.1.0 Instruction Manual

Network OS Command Reference 167

53-1003115-01

cos-mutation

Specifies the mutation-map to be used on the port.

Synopsis cos-mutation map_name

Operands map_name The user-defined map-name.

Defaults None

Command Modes Policy-map configuration mode

Description Use this command to specify the mutation-map to be used on the port.

Usage Guidelines This command is allowed only for the Ingress direction.

This command can only be configured in for the class class-default command.

This command can lead to a possible contradiction if there are other user-defined classes used in

the same policy-map which has a set CoS action configured. In this case, the defined CoS takes

priority over the mutation map.

Examples Typical command example:

switch(config)#policy-map mutation

switch(config-policymap)#class class-default

switch(config-policyclass)# cos-mutation plsmap