Reference v4.1.0 Instruction Manual

168 Network OS Command Reference

53-1003115-01

cos-traffic-class

Specifies the CoStraffic class mutation map to be used on the port.

Synopsis cos-traffic-class map_name

Operands map_name The user-defined map name.

Defaults None

Command Modes Policy-map configuration mode

Description Use this command to specify the CoStraffic class mutation map to be used on the port.

Usage Guidelines This command is allowed only for the Ingress direction.

This command can only be configured for the class class-default command.

This command can lead to a possible contradiction if there are other user-defined classes used in

the same policy-map which has a set CoS action configured. In this case, the defined CoS takes

priority over the mutation map.

Examples Typical command example:

switch(config)#policy-map mutation

switch(config-policymap)#class class-default

switch(config-policyclass)# cos-mutation cos-traffic-class dscp-mutation dscp-cos

dscp-traffic-class plsmap