Reference v4.1.0 Instruction Manual

Network OS Command Reference 169

53-1003115-01

counter reliability

Sets and displays the reliability counter for the Access Gateway N_Port Monitoring feature.

Synopsis counter reliability value

Operands value A value from 10 through 100 static change notifications (SCNs) per

5-minute period.

Defaults 25 SCNs per 5-minute period.

Command Modes Access Gateway (AG) configuration

Description This command is used for the Access Gateway N_Port monitoring feature. The command sets and

displays the reliability count of online and offline SCNs counted during a 5-minute period before

the link between an N_Port on a VDX switch in Access mode and an F_Port on an FC fabric is

considered unreliable.

Usage Guidelines Use this command while in Access Gateway (AG) mode for a specific RBridge ID. Entering the

counter reliability command without a value displays the current counter setting. You can set a

value from 10 through 100 SCNs per 5-minute period.

Examples Set the reliability counter value.

sw0(config-rbridge-id-3-ag)# counter reliability 50

Displays the current reliability counter value.

sw0(config-rbridge-id-3-ag)# counter reliability