Reference v4.1.0 Instruction Manual

174 Network OS Command Reference
53-1003115-01
debug dhcp packet buffer clear
2
debug dhcp packet buffer clear
Clears buffer content from DHCP packet capture.
Synopsis debug dhcp packet buffer clear [vrf vrf-name]
Operands vrf vrf-name VRF name mapped to the VRF ID for which the buffer will be cleared. If this
operand is not specified, the buffer for the default VRF ID is cleared.
Defaults None
Command Modes Privileged EXEC mode
Description Clears buffer content created from use of the debug dhcp packet buffer interface command to
enable DHCP packet capture. If the DHCP packet capture is currently enabled, the buffer may fill
again.
Usage Guidelines None
Examples The following example clears the buffer content of DHCP packets for a VRF 2.
sw0# debug dhcp packet buffer clear vrf-2
See Also debug dhcp packet buffer interface