Reference v4.1.0 Instruction Manual

186 Network OS Command Reference

53-1003115-01

debug ip pim

Enables debugging for IP Protocol Independent Multicast.

Synopsis debug ip pim {add-del-oif | bootstrap | group | join-prune | nbr-change | packets | parent |

regproc | route-change | rp | source | state | all}

no debug ip pim all

Operands add-del-oif Controls the OIF change flag.

bootstrap Controls the bootstrap processing flag.

group Controls the processing for a group flag.

join-prune Controls the Join/Prune processing flag.

nbr-change Controls the neighbor changes flag.

packets Controls the packet processing flag.

parent Controls the parent change processing flag.

regproc Controls the register processing flag.

route-change Controls the route changes flag.

rp Controls the Rendezvous Point (RP) processing flag.

source Controls the processing for a source flag.

state Controls the state processing flag.

all Controls all of the states.

Defaults All flags are disabled.

Command Modes Privileged EXEC mode

Description Use this command to enable or disable debugging for IP Protocol Independent Multicast.

Usage Guidelines Use the no debug ip pim all command to disable debugging.

Examples None