Reference v4.1.0 Instruction Manual

Network OS Command Reference 187
53-1003115-01
debug ip rtm
2
debug ip rtm
Enables debugging for IP RTM.
Synopsis debug ip rtm {A.B.C.D | all | counters {clear | show} dump | errors | fib-comm | nexthop | port |
vrf}
Operands A.B.C.D Debugs the route specified by this IP address.
all Enables all debugs.
counters Enables debug counters.
clear Clears debug counters.
show Shows debug counters.
dump Shows database dump.
errors Enables internal error debugs.
fib-comm Debugs communications between the forwarding information base and the
routing table manager.
nexthop Enables next-hop debugs.
port Enables port database debugs.
vrf Enables VRF debugs.
Defaults IP RTM debugging is disabled.
Command Modes Privileged EXEC mode
Description Use this command to enable or disable debugging for IP route management.
Usage Guidelines None
Examples To debug the route specified by the IP address 192.145.12.1:
switch# debug ip rtm 192.145.12.1
To show a database dump:
switch# debug ip rtm dump
Interface IP-Address OK? Method Status Protocol VRF
Gi 190/0/1 0xbe2a640c YES manual up up default-vrf
Ve 128 0xa52a800c YES manual admin/down up default-vrf
Ve 1001 0x0a010101 YES manual admin/down up default-vrf
Ve 1001 0x65010101 YES manual admin/down up default-vrf
Lo 1 0xa02a0c0c YES manual up up default-vrf
mgmt 1 0x0a14eabe YES manual up up default-vrf
IP Static Routing Table - 1 entries:
addr: 0x1021f4b8, top 0x1021f590, count 1, default 0 ffffffff
Type 2
Route_pool:
pool: 101e3bd0, unit_size: 32, initial_number:128, upper_limit:2000000000
total_number:128, allocated_number:1, alloc_failure 0
flag: 0, pool_index:1, avail_data:102207b8
Route Entry Pool:
pool: 101e3c80, unit_size: 432, initial_number:128, upper_limit:2000000000