Reference v4.1.0 Instruction Manual

194 Network OS Command Reference
53-1003115-01
debug lldp packet
2
debug lldp packet
Enables debugging for the Link Layer Discovery Protocol (LLDP).
Synopsis debug lldp packet {all | [interface fortygigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port] [both]] | [detail
[both | rx | tx]}
no debug lldp packet {all | interface fortygigabitethernet rbridge-id/slot/port | tengigabitethernet
slot/port | gigabitethernet rbridge-id/slot/port}
Operands all Turns on LLDP packet debugging on all interfaces.
interface Use this parameter to specify the interface to be monitored.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
both Turns on debugging for both transmit and receive packets.
detail Turns on debugging with detailed information.
both Turns on detailed debugging for both transmit and receive packets.
rx Turns on detailed debugging for only received LLDP packets.
tx Turns on detailed debugging for only transmitted LLDP packets.
Defaults LLDP debugging is disabled.
Command Modes Privileged EXEC mode
Description Use this command to enable or disable debugging for Link Layer Discovery Protocol (LLDP).
Usage Guidelines Enter terminal monitor to display debugging outputs on a particular cmsh session.
Enter no debug lldp packet to disable LLDP debugging.