Reference v4.1.0 Instruction Manual

Network OS Command Reference 233
53-1003115-01
distribute-list route-map (OSPF)
2
distribute-list route-map (OSPF)
Creates a route-map distribution list.
Synopsis distribute-list route-map map in
no distribute-list route-map
Operands map Name of a route map.
in Creates a distribution list for an inbound route map.
Defaults None
Command Modes OSPF VRF router configuration mode
Description Use this command to create a distribution list that can filter Link State Advertisements (LSAs)
received from other OSPF routers before adding the corresponding routes to the routing table.
Usage Guidelines Enter no distribute-list route-map to remove the distribution list.
Examples To create a distribution list using a route map named filter1 that has already been configured:
switch# configure
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)#router ospf
switch(config-router-ospf-vrf-default-vrf)# distribute-list route-map filter1 in
See Also None