Reference v4.1.0 Instruction Manual

238 Network OS Command Reference

53-1003115-01

dot1x reauthenticate interface

Initiates 802.1X reauthentication on a specified interface.

Synopsis dot1x reauthenticate interface [tengigabitethernet rbridge-id/slot/port |

gigabitethernet rbridge-id/slot/port]

Operands tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to initiate 802.1X reauthentication on a specified interface.

Usage Guidelines None

Examples To initiate reauthentication on 10-gigabit Ethernet interface 0/16:

switch# dot1x reauthenticate interface tengigabitethernet 0/16