Reference v4.1.0 Instruction Manual

Network OS Command Reference 239
53-1003115-01
dot1x reauthentication
2
dot1x reauthentication
Enables 802.1X port reauthentication.
Synopsis dot1x reauthentication
no dot1x reauthentication
Operands None
Defaults Reauthentication is disabled.
Command Modes Interface subtype configuration mode
Description Use this command to enable 802.1X reauthentication on a port.
Usage Guidelines Enter no dot1x reauthentication to return to the default setting.
Examples To enable 802.1X reauthentication on a specific 10-gigabit Ethernet interface port:
switch(config)# interface tengigabitethernet 178/0/9
switch(conf-if-te-178/0/9)# dot1x reauthentication
To disable 802.1X reauthentication on a specific 1-gigabit Ethernet interface port:
switch(config)# interface gigabitethernet 178/2/9
switch(conf-if-gi-178/2/9)# no dot1x reauthentication
See Also interface, dot1x authentication, dot1x port-control, dot1x quiet-period, dot1x reauthMax,
dot1x timeout re-authperiod, dot1x timeout server-timeout, dot1x timeout supp-timeout,
dot1x timeout tx-period