Reference v4.1.0 Instruction Manual

260 Network OS Command Reference

53-1003115-01

error-disable-timeout enable

Enables the timer to bring the interface out of the error-disabled state.

Synopsis error-disable-timeout enable

Operands None

Defaults None

Command Modes Protocol Spanning Tree configuration mode

Description Use this command to enable the timer to bring the interface out of the disabled state.

Usage Guidelines When the Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) guard disables a port,

the port remains in the disabled state unless the port is enabled manually. This command allows

you to enable the interface from the disabled state.

If xSTP is enabled over VCS, this command must be executed on all the RBridge nodes.

Examples To bring the interface out of the disabled state:

switch(conf-rstp)# error-disable-timeout enable