Reference v4.1.0 Instruction Manual

Network OS Command Reference 265
53-1003115-01
exit
2
exit
Exits the current mode and returns to the previous mode.
Synopsis exit
Operands None
Defaults None
Command Modes All command modes
Description Use this command to exit the current mode, and return to the previous mode.
Usage Guidelines When used in EXEC and Privileged EXEC modes, the exit command terminates the session.
Examples To exit the Interface configuration mode, and return to the global configuration mode:
switch(config)# interface tengigabitethernet 0/1
switch(conf-if-te-0/1)# exit
switch(config)# exit
See Also interface, enable