Reference v4.1.0 Instruction Manual

268 Network OS Command Reference

53-1003115-01

fabric ecmp load-balance-hash-swap

Configures how to swap the input fields before feeding them to the hash function.

Synopsis fabric ecmp load-balance-hash-swap value

Operands value The control value. Valid values range from 0x0 through 0xFFFFFFFF.

Defaults None

Command Modes RBridge ID configuration mode

Description Use this command to configure how to swap the input fields before feeding them to the hash

function. The variable value for this command is interpreted as the bitwise control of the 212-bit

key. Each bit controls whether 2 adjacent bits of the key are to be swapped. This 32-bit control

value is written to all four hash swap control registers. This means that this value is replicated in a

32-bit block to form a 106-bit value. A value of 0x0 does not swap any input fields, while a value of

0xffffffff swaps all 106 input bit-pairs.

Usage Guidelines This command does not function in standalone mode.

Examples None