Reference v4.1.0 Instruction Manual

270 Network OS Command Reference
53-1003115-01
fabric route mcast
2
fabric route mcast
Sets the multicast priority for the local RBridge in the fabric.
Synopsis fabric route mcast rbridge-id rbridge-id priority priority
Operands rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
rbridge-id Specifies the RBridge ID.
priority Sets a priority. The highest priority overrides the lowest RBridge ID and
becomes the root.
priority Specifies the priority number of the RBridge.
Defaults Priority is 1.
Command Modes Global configuration mode
Description Use this command to set the multicast priority for the local RBridge in the fabric. The multicast
routing information indicates all ports that are members of the multicast distribution tree: ports
that are able to send and receive multicast frames.
Usage Guidelines The root of the tree is auto-selected as the switch with the lowest RBridge ID.
This command is not valid in standalone mode.
Examples To change an RBridge multicast priority:
switch(config)# fabric route mcast rbridge-id 45 priority 5
switch(config)# exit
switch# show running-config fabric route mcast rbridge-id 45 priority
fabric route mcast rbridge-id 45 priority 5
See Also show fabric route multicast, show fabric route topology, show running-config fabric route mcast