Reference v4.1.0 Instruction Manual

Network OS Command Reference 273

53-1003115-01

fabric-map

Enables FCoE fabric-map configuration mode.

Synopsis fabric-map default

Operands None

Defaults None

Command Modes FCoE configuration mode

Description Use this command to enable the FCoE fabric-map configuration mode. An FCOE fabric-map is

equivalent to an FC Virtual-Fabric.

Usage Guidelines The only map name allowed is “default.”

You must be in the feature configuration mode for FCoE for this command to function.

This command does not function in standalone mode.

Examples

switch(config)# fcoe

switch(config-fcoe)# fabric-map default

switch(config-fcoe-fabric-map)#