Reference v4.1.0 Instruction Manual

278 Network OS Command Reference

53-1003115-01

fcoe-enodes

Sets the number of FCoE ENodes that are to be created on a switch.

Synopsis fcoe-enodes number

no fcoe-enodes

Operands number The number of FCoE interfaces. The range is from 0 through 1000.

Defaults The default value is 64.

Command Modes RBridge ID configuration mode, fabric map configuration mode

Description Use this command to set the number of FCoE ENodes that are to be created on a switch.

Usage Guidelines This command replaces the max-enodes command.

If the user tries to configure the number of FCoE interfaces with the above command, an error is

thrown as in the following example:

switch(config)# fcoe

switch(config-fcoe)# fabric-map default

switch(config-fcoe-fabric-map)# max-enodes 500

%Error: This command is not allowed to configure max enodes. Please use

fcoe-enodes under rbridge mode.

This feature requires an FCoE license. If that license is not present, the number of FCoE ENodes

created is 0. When that license is removed, it is recommended that the switch be rebooted. The

number of FCoE ENodes created is set to 0 and all interfaces are deleted.

Examples To set the number of FCoE ENodes to be created to 67:

switch(config)# rbridge-id 10

sw0(config-rbridge-id-10)# fcoe

sw0(config-rbridge-fcoe)# fabric-map default

sw0(config-rbridge-fcoe-fabric-map)# fcoe-enodes 67

2013/08/16-09:59:11, [FCOE-1035], 9267, DCE, INFO, sw0, Virtual FCoE port 1/19/65

is online.

2013/08/16-09:59:11, [FCOE-1035], 9268, DCE, INFO, sw0, Virtual FCoE port 1/19/66

is online.

2013/08/16-09:59:11, [FCOE-1035], 9269, DCE, INFO, sw0, Virtual FCoE port 1/19/67

is online.

sw0(config-rbridge-id-19-fcoe-fabric-map)#