Reference v4.1.0 Instruction Manual

Network OS Command Reference 285

53-1003115-01

filter-change-update-delay

Sets a delay to change the delay in the filter-change status prompt from the default.

Synopsis filter-change-update-delay delay_time

no filter-change-update-delay

Operands delay_time The delay, in seconds, in the filter-change status prompt. Range is from 0

through 600.

Defaults The default value is 10.

Command Modes RBridge ID configuration mode

Description Use this command to change the delay in the filter-change status prompt from the default.

Usage Guidelines Enter 0 (zero) or use the no form of this command to disable the timer.

Examples None