Reference v4.1.0 Instruction Manual

312 Network OS Command Reference

53-1003115-01

ha chassisreboot

Performs a reboot of the chassis.

Synopsis ha chassisreboot

Operands None

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to perform a reboot of the entire chassis. Both the active and the standby

management module reboot. Both management modules retain their original high-availability (HA)

role after the system comes back up. If the power-on self test (POST) is enabled, it is executed

when the system comes back up.

Usage Guidelines This command is supported only on the active management module. This command is not

supported on the standby management module. Both management modules must be in sync for

the HA reboot operation to succeed. Failover and reboots can be disruptive.

Examples To perform an HA reboot:

switch# ha chassisreboot

See Also ha failover, ha enable, reload, show ha