Reference v4.1.0 Instruction Manual

Network OS Command Reference 319
53-1003115-01
hello (LLDP)
2
hello (LLDP)
Sets the Hello transmit interval.
Synopsis hello seconds
no hello
Operands seconds Valid values range from 4 through 180 seconds.
Defaults 30 seconds
Command Modes LLDP protocol configuration mode
Description Use this command to set the interval between LLDP hello messages.
Usage Guidelines Enter no hello to return to the default setting.
Examples To set the time interval to 10 seconds between the transmissions:
switch# configure terminal
switch (config)# protocol lldp
switch(conf-lldp)# hello 10
See Also None